Lazer Z S-Series: More power. More features. More productivity.
The Deck Support System uses a Panhard rod system adapted from NASCAR.® It eliminates deck sway and moves lateral forces away from deck struts, reducing wear.
Feathering made easy: Our transport lock function makes it easy to feather the deck on uneven terrain. Keep the deck locked or unlocked in the “Up” position for smooth, scalp-free feathering.
Gaining traction: Horsepower is meaningless if you can’t get that power to the ground. That’s why we use Carlisle® Turf Master® drive tires. Because serious performance demands serious traction.
Less time at the pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location. So fuel stops are fewer and farther between.
Built to last: Want tough? Try a 10-gauge, formed and continuously seam-welded top. 7-gauge side skirt. Welded spindle mounting sites. And full-floating, 4-point suspension with 4 adjustable anti-scalp rollers.
Air Filter: Heavy-duty canister air filtration system
Drive System: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
Drive Wheel Release: Allows unit movement without engine running.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Rollover Protection System (ROPS): 2-post foldable ROPS standard with seat belt and latch.
Casters: .50" thick caster yoke arms.
Cup Holder: Standard
CARB Compliant: No
Deck Construction: 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Deck Style: Full-floating RD Series High-Capacity Cutting Platform. Rear-discharge standard with option to mulch.
Width: 60" (152.4 cm)
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades: 3 Blades at 20.50" Length
Blade-Tip Speed: Approximately 18,500 fpm.
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
Drive Tires: 24 x 12-12, 4 ply Turf Master®
Parking Brake: Lever-actuated disc brake.
Seat: Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Electrical: 12-volt battery with 20-amp alternator.
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors