2015 Land Pride SSG2524

Call for Price


Stock Image

Stock Image

New/Used
New
Availability
In Stock
Location
Metro Equipment & Rental - Odessa
Title
Clean
Condition
Excellent
Year
2015
Manufacturer
Land Pride
Model
SSG2524

Overview

Description

The Land Pride Stump Grinder is a great choice for contractors, landscapers, and forestry departments. Skid steer mounted, this Stump Grinder turns large stumps into small chips. It features durable carbide teeth mounted to a 1/2" cutting wheel that spins up to 1,100 rpm. Fully controllable from inside the cab, this unit has a maximum cutting arc of 55 degrees and depth of 8" below ground.

Features
  • 8" Digging depth - A good depth below the ground. Removes base of most trees.
  • Adjustable skid shoes - Adjustable to fit all sizes of skid steers.
  • Attached rain tight manual holding tube - Keeps manual with stump grinder for quick easy access. Manual won’t get wet.
  • Case drain hydraulic line - Protects against component damage.
  • Cutting wheel designed with wheel puller access holes - Makes it easier to pull the cutting wheel off of the motor spindle.
  • High speed cutting wheel - Cuts faster with less vibration.
  • Hydraulic hose lines - Hydraulic hoses absorb shock. Steel hydraulic lines crack from vibration.
  • Keyed, tapered spindle on end of hydraulic motor - Able to draw cutting wheel tight against the tapered shaft providing an excellent fit-up and less likely to shear the key off.
  • Offset articulating arm - Allow for optimum line-of-site from operator’s seat.
  • Permanent hose holders - Hoses aren’t zip-tied to the frame. Zip ties can break over time.
  • Pivoting discharge deflector - Discharge deflector pivots up while cutting wheel is digging into the ground.
  • Replaceable carbide cutting teeth - Cutting teeth are easy to replace. Carbide tips for extra long life.
  • Universal quick attach mounting system - For quick and easy attachment.
  • Welded on serrated step - Good safe step for accessing skid steer operator’s seat.
Engine
  • Angle Cylinder: 3" x 6" stroke with 1 1/4" rod dia.
Dimensions
  • Cutting depth max: 8"
  • Cutting Wheel: (Speed)-590 to 1100 RPM ; (Cutting Arc)-55 Degrees ; (Diameter) - 23 3/4" ; (Thickness) - 1/2"
  • Operating Weight: 540 lbs.
  • Overall Length: (Without Shielding)-60"
  • Overall Width: (Mounting)-48"
General Information
  • Drive System: Hydraulic motor with Electric over hydraulics
  • Hydraulics: Lines & Hoses - 3/4" I.D. Hydraulic hoses with crimp on cordura sleeve 1/4" I.D. Case drain hydraulic hose
  • Lift: (Cylinder)-3" x 6" stroke with 1 1/4" rod dia.
  • MainFrame: 6" x 6" x 1/4" Tube
  • Mounting: (Plate)-Quick Attach
  • Number of Teeth: (Cutting Teeth) - Straight - 8 - Replaceable carbide teeth ; Left-Hand - 12 - Replaceable carbide teeth ; Right-Hand - 12 - Replaceable carbide teeth
  • Standard: Greasable Hinge Points
Hydraulics
  • Hydraulic Requirement: 17 to 32 GPM

Specs

General

Cutting Diameter
(Speed)-590 to 1100 RPM ; (Cutting Arc)-55 Degrees ; (Diameter) - 23 3/4" ; (Thickness) - 1/2"
Length
(Without Shielding)-60"